Application
Special characteristics
Nominal sizes
Variants
Construction
Parts and characteristics
Attachments
Useful additions
Construction features
Material and surfaces
Powder-coated construction (P1)
Variant with acoustic cladding (-D)
Mineral wool
Standards and guidelines
Casing leakage
Closed blade air leakage
Maintenance
① Effective pressure sensor
② Damper blade
③ Gears
④ Control components, e.g. an Easy controller
The VAV terminal unit is fitted with an effective pressure sensor for measuring the volume flow rate. The control components (attachments) include an effective pressure transducer that transforms the effective pressure into an electric signal, a controller, and an actuator; the control functions can be achieved with an Easy controller or with a Compact controller or with individual components (Universal or LABCONTROL). For most applications, the setpoint value comes from a room temperature controller. The controller compares the actual value with the setpoint value and alters the control signal of the actuator if there is a difference between the two values.
Nominal sizes | 200 × 100 – 1000 × 1000 mm |
Volume flow rate range | 42 – 17,223 l/s or 149 – 62,005 m³/h |
Volume flow rate control range (unit with dynamic effective pressure measurement) | approx. 20 to 100 % of the nominal volume flow rate |
Minimum differential pressure | Up to 109 Pa (without secondary silencer) |
Maximum differential pressure | 1000 Pa |
Operating temperature | 10 to 50 °C |
This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design program.
Specification text
Rectangular VAV terminal units for variable and constant air volume systems, suitable for supply or extract air, available in 39 nominal sizes. High volume flow rate control accuracy. Ready-to-commission unit which consists of the mechanical parts and the electronic control components. Each unit contains an averaging effective pressure sensor for volume flow rate measurement and damper blades. Factory mounted control components complete with wiring and tubing. Position of the damper blades indicated externally at the shaft extension. The damper blade is factory set to open position, which allows a ventilation airflow even without control; this does not apply to variants with defined safe position NC (normally closed).
Special features
Materials and surfaces
Connection type
Technical data
Equivalence criteria
Specification text attachment
Variable volume flow control with electronic Easy controller for applying a reference value and capturing an actual value to be integrated with the central BMS.
Sizing data
Air-regenerated noise
Case-radiated noise
Life cycle assessment
A life cycle assessment is available for the product type in the form of an environmental product declaration (EPD), which has been checked and published by a programme holder.
TVJ | – | D | / | 900 × 300 | / | Easy |
| | | | | | | | |||
1 | 2 | 4 | 5 | |||
1 Type
TVJ VAV terminal unit
2 Acoustic cladding
No entry: none
D with acoustic cladding
4 Nominal size [mm]
B × H
5 Attachments (control component)
Easy Volume flow controller, dynamic, analogue interface, setting of qᵥmin and qᵥmax with potentiometers (provided on site)
Acoustic cladding | With |
Material | Galvanised sheet steel |
Nominal size | 500 × 400 mm |
Attachments (control components) | Easy controller; volume flow controller, dynamic, analogue interface, setting of qvmin and qvmax with potentiometers |
Zdieľať stránku
Odporučiť túto stránku
Odporučiť túto stránku zaslaním odkazu emailom.
Zdieľať stránku
Ďakujeme za doporučenie!
Vaše odporúčanie bolo odoslané a zakrátko by malo býť doručené.
Kontakt
Sme tu pre vás
Uveďte prosím vašu správu a druh otázky
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Ďakujeme vám za správu!
Vaša správa je odoslaná a čoskoro bude spracovaná.
Naše servisné oddelenie sa s vami čo najrýchlejšie spojí Pre obecné informácie o výrobkoch alebo službách môžete tiež zavolať:
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Sme tu pre vás
Uveďte prosím vašu správu a druh otázky
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Ďakujeme vám za správu!
Vaša správa je odoslaná a čoskoro bude spracovaná.
Naše servisné oddelenie sa s vami čo najrýchlejšie spojí Pre obecné informácie o výrobkoch alebo službách môžete tiež zavolať:
Tel.: +420 283 880 380 | Fax: +420 286 881 870